What is the difference between 235 and 265 tires - pgz

VISIT WEBSITE >>>>> http://gg.gg/y83ws?1659622 <<<<<<

Ever hopped on your car and noticed the numbers carved on your tires? Did you know what those numbers mean? The numbers from your tires mean a lot of significant information. It could be related to sizes or expiration dates.

Though, what we are about to discuss here is the difference between size and tires. Remember that markets have variants of sizes to choose from, but it is important to identify what these numbers mean and which size is compatible with them. Talking about tire size , it serves as a measurement in millimeters from the cross-section width. The number 70 that comes after the slash is the aspect ratio.

Yes , they are. In most cases, tires with lower aspect ratios respond to lateral forces more effectively than those tires with higher aspect ratios, so tires will effectively respond to lateral force better than the tires. For safety reasons be sure that the replacement tires are rated for both load and speed at or above the specifications for your Vehicle. Be sure to replace the tires in pairs on either the front or rear axles.

Failure to do so could cause problems. The , being thinner, has less rolling resistance than the The actual width of the tire will vary depending on the width of the rim: The tire will expand 5 millimeters for every half inch The choice is up to you.

Long story short: Yes , it is a problem to have two tires of different sizes on the front or back of your car. Having two different-sized tires on the same axle is generally not a good thing. Not safely , no. If you go to a narrower tread width tire you will want to increase the sidewall height aspect ratio exponentially.

Visit our tire height chart page to browse all the available tire size conversions by wheels size or diameter. Tire Height in Inches. Tire Size Visualizer. Available Tires. Use the tire converter to populate a list of alternate tire sizes.

The tire diameter has to be the same as the tire diameter. Some may start with an LT prefix, used on heavy-duty trucks.

The number is the cross-section width in millimeters, while 70 is the ratio of sidewall height to cross-section width 70 percent. R means radial-ply construction and 16 is the wheel diameter, in inches. Yes, both tires can fit on the same rims.